Wire and Terminal Block failure may also be caused by a short circuit between the wiring harness and the body or inside the switch. Before checking, you should first see if the terminals in the body are fixed securely, and then you can test according to the following steps.
If the Wiring Terminal is not properly fixed, it will directly affect the reliability of the contact. At this time, to a large extent, it will cause an instantaneous power failure. The serious one actually means the product disintegration.
Wiring terminal is a kind of connector, which came into being to facilitate wire connection. Usually composed of insulating parts, conductive parts, solder feet, etc., for spring-type terminals, there are also shrapnel. The terminal block is a technological design.
Copyright © YueQing GaoKe Environmental Electric Co., Ltd. All Rights Reserved | Sitemap | Powered by